Wednesday, January 07, 2009     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Setup advisor issue
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
imaqsood
Posts: 30
Online: User is Offline
9/15/2006 3:45 AM  
Hello Guys,

Faced a problem with Tool -à Setup Advisor -à Edit cross section that when I updated the specs for single ended nets and then when I switched to “Differential Mode” & entered there values. After that when I again come back to Single ended Mode. I observed that values have been changed. Any one has any solution for that?

irfan

jbhorner
Posts: 4
Online: User is Offline
10/03/2006 2:36 PM  
This is the way the tool works. The values you are entering are purely there for calculation sake. They are not going to control the route behavior. You need to control the actual spacing/widths using the Net_Spacing, and Net_Physical methods.
Posting to forums is available to community members only.
Login or Register



ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.