Thursday, November 20, 2008     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: ask one question about ibis model
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
yyqygdx
Posts: 0
Online: User is Offline
9/27/2005 9:08 PM  
I am want to compare the two ic compatibility,so i use their ibis model to simulate by allegro. then, simulation result looks like being a large delay when be as output pin. can you tell me what part of ibis model bring the delay different? thanks!
lwang
Posts: 0
Online: User is Offline
9/28/2005 7:08 AM  
Usually, if your IBIS model has the TV (Rising, falling) waveforms, this is the major delay part you would see in the simulation. However, HSpice did some Threshold tracking for their IBIS model simulations. This would cause some delay differences between HSpice and other IBIS simulators. It basically should be a smaller delay than HSpice simulation.

Hope this helps.
Lance
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > Signal Integrity and Modeling > ask one question about ibis model


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.