Thursday, November 20, 2008     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Points of load Simulation
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
dadi_matza
Posts: 1
Online: User is Offline
11/28/2005 10:55 PM  
Hi
I know the theory of points of load on PCB.
They should be as close as possible to the CPU or FPGA and regulated without any interferences.
My question is that if it is acceptable to use power supply with the points of load on it.
I need to use 5V, 3.3V, 2.5V and 1.5V.
The 2.5 and 1.5 are the points of load, but I want to design them on the power supply as isolated power.
And route 10 inches long 1/4 width conductors for these powers and put few low ESR capacitors near the CPU/FPGA.
Any recommendations?
Is it acceptable?
Can I simulate this case?
Posting to forums is available to community members only.
Login or Register



ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.