Thursday, November 20, 2008     Register | Login | Search | Contact Us
     
   
     
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Forums > Silicon-package-board > Signal Integrity and Modeling

Subject: Regarding SI230 OR 610 FEATURES
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
allen
Posts: 13
Online: User is Offline
2/06/2006 9:14 PM  
Hello all,
i was looking the data sheets Comparision of SI210 230 AND 610 CAN ANY ONE TELL ME WHAT THE BELLOW FEARUEWS MEANS

1) BATCH SIMULATION

2) DIFFERENCIAL SIGNAL CONSTRAINST CAPTURE

3) COUPLED LINE SIMULATION

4) CROSSTALK SIMULATION ( WHICH NOT THERE IN 210 AND PRESENT IN 230)

PLS REPLY FOR THIS IT IS IMPORTANT FOR ME.

ALLEN

mcatramb91
Posts: 141
Online: User is Offline
2/07/2006 10:39 AM  
The information you seek is available on the Cadence web site (cadence.com), here is a couple links:

(Allegro PCB SI Main Page)
http://www.cadence.com/products/si_pk_bd/pcb_si/index.aspx

(Allegro PCB SI Datasheet)
http://www.cadence.com/datasheets/allegro_pcb_si230_ds.pdf

You will find a comparison table on the last page of the PDF.
allen
Posts: 13
Online: User is Offline
2/07/2006 9:30 PM  
Yes thank you but from that datasheet comparision i am not able to understand this feature...


if any one what this feature is...?


allen
Kalevi2
Moderator
Posts: 69
Online: User is Offline
2/12/2006 9:19 AM  
Allen:

The biggest difference between 230 and 610 is that 210 lacks the autorouter and you won't get real time "red" or "green" flags if you are manually routing and you violate or meet constraints. 230 is fine for most pre- and post- layout analysis work. 210 is a subset of 230 which does not let you define constraints for board files. It is good for exploratory work but not really useful in the full design flow.

You should probably start with 230 if you want to see how the tool can fit into your Allegro design flow.
Kai Keskinen
Posting to forums is available to community members only.
Login or Register
Forums > Silicon-package-board > Signal Integrity and Modeling > Regarding SI230 OR 610 FEATURES


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.