Wednesday, January 07, 2009     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Attach net in streaming out
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
semicond
Posts: 7
Online: User is Offline
11/13/2005 10:19 AM  
Hi;
I am using encounter for p&r and calibre for lvs.
I am trying to put port names on the pads so that calibre can recognize the ports.
I tried attachNetName but, I couldn't do that.
Is there any way by which I can stream out port names (with text layers)?

Thank you
mohanch007
Posts: 52
Online: User is Offline
11/20/2005 5:48 PM  
Hi ,

Please use the following command and info.
BTW is this for Black or Chip ?

##### Output GDSII #####
setStreamOutMode -SEcompatible ON
streamOut [dbgDesignName]file.outgds \
-structureName [dbgDesignName] \
-mapFile gds2.map \
-units 1000

Ex. for mapfile to be appended:
NOTE : Map info. Depends on GDS ports text pattran .
# following section has been defined for pad text layer extraction
NAME M1/PIN 45 8
NAME M2/PIN 47 8
NAME M3/PIN 49 8
NAME M4/PIN 51 8
NAME M5/PIN 57 8

Regards,
Mohan
Posting to forums is available to community members only.
Login or Register

Forums > Digital IC > Floorplanning, Place and route > Attach net in streaming out


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.