Wednesday, December 03, 2008     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Adding plating lines in BGA package
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
Gaz
Posts: 4
Online: User is Offline
4/17/2007 6:49 AM  
Hi,

Is there anyway to automatically add plating lines in APD 15.7?.... i am trying to add plating lines for an etchback process, is there anyway to automise this?

Thanks

Ghazanfer
BillAcito
Posts: 14
Online: User is Offline
4/17/2007 10:09 AM  
I am assuming you are referring to adding traces within the etchback tool? (Manufacturing-->Etchback)

The add trace is manual. Shorting schemes and design practices vary by such a great degree customer to customer, it would be very difficult to add automation to the trace add that would cover all of them (e.g. what rules should the tool use to determine the best location for the short? closest approach? most available space?)

Once placed, the tool does automate the creation of the mask openings, based on user defined spacing parameters.

Regards,

Bill
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > IC Package, SiP and Co-design > Adding plating lines in BGA package


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.