Thursday, January 08, 2009     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Cross Probe between Concept and Allegro during placement
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
mcatramb91
Posts: 141
Online: User is Offline
11/08/2006 11:07 AM  

Hello all,

I thought at one point you were able to cross probe between Concept and Allegro during placement.   In other words,  you would be able to select a component(s) in Concept and drag it over to Allegro for placement.  This would allow one click placement in Allegro of the primary component and all its associated components driven by its location in Concept.

If I enter Place Manual in Allegro and select component in Concept it will check the components for placement so I can place them one at a time but I was looking to use the components relative location on the schematic for placement in Allegro.

Thanks in advance,
Mike Catrambone
UTStarcom, Inc.

Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > Cross Probe between Concept and Allegro during placement


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.