Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: How to check the unconnected line in Concept HDL
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
leonlee
Posts: 81
Online: User is Offline
11/06/2007 12:22 AM  
I met an problem in Concept HDL. 
Concept HDL can't  check unconnected line during drawing schematic.

It like below:

A line is close to one pin or other line, which should be connected.
Sometimes, it is hard to be discovered, and the Check Tools can't support it.
How check it?






Leon Lee
Schneider-Electric
leonlee
Posts: 81
Online: User is Offline
11/06/2007 12:25 AM  
I have checked all the settings in Tools>Options/Check, no function for this check point.
Does anybody meet the same problem?

Leon Lee
Schneider-Electric
psj
Posts: 34
Online: User is Offline
11/06/2007 1:54 AM  

Hi,

We also sometimes face this problem in Design Entry CIS .And yes, it is hard to discover this in Design Entry CIS too. We discover this problem, when we donot a net in the PCB Editor after generating netlist . If there is a solution for checking this Design Entry CIS also ?

Regards,
Prajakta.
leonlee
Posts: 81
Online: User is Offline
11/16/2007 1:14 AM  
No any answer?

UP~~~

Leon Lee
Schneider-Electric
leonlee
Posts: 81
Online: User is Offline
12/04/2007 5:07 PM  
Up to top.

Leon Lee
Schneider-Electric
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > How to check the unconnected line in Concept HDL


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.