Wednesday, December 03, 2008     Register | Login | Search | Contact Us
     
   
     
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Forums > Silicon-package-board > PCB Design

Subject: dynamic shapes not moving with group
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
padmaster
Posts: 9
Online: User is Offline
12/03/2004 6:21 AM  
I have created several groups in my design. These groups consist of components, clines, vias and dynamic shapes. When I select a group to move, the dynamic shapes are not selected with the group therefore do not move with the group. These shapes ARE part of the group.

Note: One of the components in the group has a shape built into the symbol. This shape does get selected with the group and does move with the group.
Charlie
Posts: 0
Online: User is Offline
12/03/2004 6:33 AM  
This is a known issue with dynamic shapes. A PCR has been filed and I think it is planned to be resolved in 15.5. This was discovered in Design Reuse methodolgy which makes heavy use of groups.
padmaster
Posts: 9
Online: User is Offline
12/03/2004 6:42 AM  
Thanks Charlie :)

When is 15.5 due for release?
Charlie
Posts: 0
Online: User is Offline
12/03/2004 6:58 AM  
The target FCS is 6/13/05.
ThomasMiller
Posts: 0
Online: User is Offline
1/18/2005 3:43 PM  
Is there any known workaround for this problem yet? I have 18 Design Reuse modules in my current design and each module has 8 dynamic shapes. Any ideas on how to keep these selections together?
Posting to forums is available to community members only.
Login or Register
Forums > Silicon-package-board > PCB Design > dynamic shapes not moving with group


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.