Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Why slot info missing in ncdrill file
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
Moderator
Posts: 94
Online: User is Offline
12/27/2004 1:04 AM  
Why slot info missing in ncdrill file?
Even if we provide the drill bit in nc tools it couldn't happen. Whether slots are to be customized by PCB Fab.!!!
Padmin
Posts: 0
Online: User is Offline
12/27/2004 7:24 AM  
Hi,

Slot info shows up when running NC Route (Mfg > NC > NC Route).

I found the following solution by searching SourceLink with the keywords ""drill slot missing"".


Title:
No warning to run NC Route when slotted holes exist in Allegro.

Problem statement:
I have a design that contains slots so NC Route must be run to generate route data to route these slots. When I run NC Drill, I would expect a warning message similar to the above message to be generated indicating that I need to make sure to run NC Route.

Solution:
This has been reported in PCR 725601 and will be addressed in the 15.5 release. Before the 15.5 release is available, users must be aware of the fact when slotted holes exist on a design, NC Route must be run.


I hope this helps!
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > Why slot info missing in ncdrill file


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.