Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: back-annotate pcb_footprint info into my library?
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
tainsworth
Posts: 2
Online: User is Offline
2/14/2008 8:58 AM  
Hi, I'm relatively new to OrCAD. I have sent a design out to our layout contractor who uses PADS. He has returned an updated version of the schematic to me which now includes his PCB_FOOTPRINT information. Isn't there some way to back-annotate this information into my existing library? I tried copying a part from the Design Cache back into my library, but the footprint info doesn't seem to be attached to the part in the cache.

Thanks,
Trent Ainsworth
Zephyr Engineering
dominic_obar
Posts: 3
Online: User is Offline
3/05/2008 2:39 AM  
Hi Trent,

I have a very helpful Orcad tutorial document in pdf format, if you are interested I can share it to you. Send me an email at dominic_obar@yahoo.com, then I will reply to you with this document in the attachment. It has techniques that facilitate footprint assignment in the schematic. I found it in the internet, I am just thinking that maybe you have not seen it yet.

Regards,
Dominic
tainsworth
Posts: 2
Online: User is Offline
3/05/2008 6:38 AM  
Terrific, Dom, will do. Thanks!

Thanks,
Trent Ainsworth
Zephyr Engineering
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > back-annotate pcb_footprint info into my library?


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.