Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Adding Ground Loop around Board Area
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
Rajiv
Posts: 21
Online: User is Offline
3/12/2008 1:36 AM  
Dear All In my current project I have to add ground loop around the 4 layer board. Further this loop will be shorted at connector with other grounds (Digital & Power)to make one point ground. What is the criteria for deciding upto how many layers we should make this ground loop area. What factors comes into play while deciding this? Thanks in Advance

Regards!!
Rajiv Vig
Mando Softtech India
Rajiv
Posts: 21
Online: User is Offline
3/12/2008 1:36 AM  
Dear All In my current project I have to add ground loop around the 4 layer board. Further this loop will be shorted at connector with other grounds (Digital & Power)to make one point ground. What is the criteria for deciding upto how many layers we should make this ground loop area. What factors comes into play while deciding this? Thanks in Advance

Regards!!
Rajiv Vig
Mando Softtech India
Kalevi2
Moderator
Posts: 69
Online: User is Offline
3/12/2008 4:28 AM  
A loop such as this is usually intended to direct an esd event around the periphery of the board rather than through the more sensitive areas. Put the ground ring on each layer if possible and make sure it is on the outer layers.

Kai Keskinen

Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > Adding Ground Loop around Board Area


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.