Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Change Layer Order
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
togarha
Posts: 3
Online: User is Offline
3/15/2005 5:58 AM  
Hi! I have a ruted 12 Layers PCB with Layout and I want to do a Specctra Quest Test, but when I export the design from Layout to Allegro (with TOALLEGRO software) I obtain the design with the order of layers not like I want, there is any posibility to change the order or layer in Allegro, Layout, Specctra or anything else...

Thanks a lot

togarha
horner
Posts: 0
Online: User is Offline
5/11/2005 12:12 PM  
Toghara,
Not as easily as you'd probably like, but you can clip out all the etch on each layer, save them to clip files (be sure to use a common origin for all clips). Now you can go in and seletes all the etch on the layers you want to move, rename the layer names, and clip the etch items back in. If all the vias are through vias, then basically all you need to clip out are the actual traces, and can leave the vias behind. When you clip the files back in, then they will reconnect to the vias to make the connection. I seem to remember a skill program that was posted on the web to aid in doing this. I can't seem to locate it now.
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > Change Layer Order


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.