Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: warning: "could not fit symbol"
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
Roseann
Posts: 0
Online: User is Offline
5/16/2005 3:40 PM  
I get this message on a couple of symbols now when trying to quickplace. Any clues??
thanks
Padmin
Posts: 0
Online: User is Offline
5/17/2005 5:47 AM  
It sounds like your drawing size is too small to fit the symbols in. Select Setup > Drawing Size and increase the size or select Place > Manually and see if you can place the symbols inside the outline. Let us know if this helps. Thanks!
osprey
Posts: 0
Online: User is Offline
5/17/2005 5:52 AM  
another possibility may be that your symbol is built with a piece of geometry far away from the origin of the symbol itself. Bring up your symbol in the symbol editor, display all layers and then do a fit view. If there is something amiss it will be quite obvious.
jlc
Posts: 6
Online: User is Offline
1/30/2007 3:20 PM  
Another area to check is the pin numbering. Do the footprint pin numbers match what is used in the schematic symbol.
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > warning: "could not fit symbol"


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.