Friday, May 18, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Verifying schedule
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
steffenh
Posts: 0
Online: User is Offline
5/24/2005 9:32 AM  
Hello,

Does anybody have any luck scheduling xnets in an ECset and then have them verify in CM? I have derived an ECset from one xnet and applied it to that net, yet the schedule results in the wiring tab say that the xnet does not verify. This just does not seem right. If I create an ECset from an xnet, then it sure ought to at least verify the schedule at a minimum.
Padmin
Posts: 0
Online: User is Offline
5/24/2005 11:20 AM  
It does verify the schedule so something must not match your topology. One thing to look for is if you have stubs in your design, but no stub length defined in the ECset. That will cause this message.
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > PCB Design > Verifying schedule


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.