Thursday, January 08, 2009     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: ncsim for System Verilog
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
prasad_vc
Posts: 0
Online: User is Offline
8/27/2006 11:10 PM  

Hi All,
I want to run the DPI in system verilog along with cadence ncsim.
After writing the code what are the steps to compile and simulate the code?

I am using ncsim 5.40-s012.

I am using the following command for compilation :

ncsim -sv my_file.v

The place at which i am importing the 'c' function, is giving the error: parenthesis missing ('(').

 

tpylant
Posts: 87
Online: User is Offline
8/29/2006 9:23 AM  
Hello,

Can you paste the code where you are importing the DPI? Without that, it's hard to know what the problem is.

Thanks,
Tim
prasad_vc
Posts: 0
Online: User is Offline
9/20/2006 2:00 AM  
Thanx tim,

The problem was with tool, it needs atleast 5.60v of ncsim to do DPI.

The steps i found out are:

gcc -shared -fPIC -o libdpi.so c-file-name.c

ncverilog +sv31a sv-file-name.sv


Vivek.
Posting to forums is available to community members only.
Login or Register

Forums > Functional Verification > SystemVerilog > ncsim for System Verilog


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.