IEEE ISQED07 Call for Registration > Forums

Unanswered

Active Topics

Forums

Forums > General topics > Event Notices

Subject: IEEE ISQED07 Call for Registration

Posting to forums is available to community members only.
Login or Register

Rate this topic:

Author

Messages

loriann555
Posts: 0
Online: User is Offline

2/22/2007 11:14 AM
CALL FOR REGISTRATION ISQED 2007 8th International Symposium & Exhibits on QUALITY ELECTRONIC DESIGN March 26-28, 2007. San Jose, CA, USA www.isqed.org Leading Design for Quality & Manufacturability™ Advance Registration Deadline: March 14, 2007 Hotel Room Reservation Cut-Off: March 1, 2007 Registration Please refer to ISQED web site at www.isqed.org for information regarding the tutorials, conference, tutorials, and hotel registration. Direct all conference inquiries to isqed@isqed.org. Early registration is recommended to take advantage of the discounted registration fee. About ISQED The International Symposium on Quality Electronic Design (ISQED) is a leading Electronic Design & Design Automation conference, aimed at bridging the gap among electronic design tools and processes, integrated circuit technologies, processes & manufacturing, to achieve design quality. ISQED is the pioneer and leading international conference dealing with design for manufacturability and quality issues front-to-back. ISQED emphasizes a holistic approach toward electronic design and intends to highlight and accelerate cooperation among the IC Design, EDA, Semiconductor Process Technology and Manufacturing communities. ISQED spans three days, Monday through Wednesday, in three parallel tracks, hosting over100 technical presentations, six keynote speakers, panel discussions, workshops/tutorials and other informal meetings. Conference Highlights Tutorials/Workshops ISQED 2007 is pleased to offer a single full-day tutorial track, presented by several experts in their respective fields. This tutorial track consists of several major topics such as Emerging Nano-Devices and Lowe Power Design, Role of Bioelectronics for Quality of Life, Energy-performance-variability Trade-offs, Advanced modeling of analog and mixed-IC circuits, and Design Methodologies and Tools for Circuit Design in CMOS Nanometer Technologies. Multi-Gate MOSFET Design: Gerhard Knoblinger, Infineon Technologies Sub 45nm Low Power Design Challenges: James W. Tschanz, Intel Self-adaptive Systems to Drive Out the Nano-Scale Devil: Marcal Pol, IMEC DFM and Yield: Srikanth Venkataraman, Intel DFT, Test, Debug and Diagnosis: N. Nagapalli , AMD Quality-driven Architecture Synthesis and Power Aware Design of Embedded SoCs: Dr. Lech Jozwiak, Eindhoven University of Technology Plenary Sessions Two plenary sessions will be held on Tuesday and Wednesday mornings. Several industry & academia leaders will discuss the issues surrounding electronic design, design for yield and manufacturability and other critical topics from various points of view. Plenary keynote speakers are: Jeong-Taek Kong, Vice President, Samsung, Korea Joe Sawicki, GM and VP, Mentor Graphics, USA Marc Duranton, Principal Scientist, NXP Semiconductors Philippe Prous, Gemalto, France Panel Discussions ISQED is pleased to offer two high-power evening panel discussion sessions, where many leading experts, address the important issue of quality design. These panels would focus on the following topics: 1 DFM: EDA’s salvation or its excuse for being out of touch with engineering? 2 Do Digital Design and Variability Mix Like Oil and Water ? Luncheon Speech EDA to the Rescue of the Silicon Roadmap Dr. Thomas W. Williams, Fellow, Synopsys Vendor Exhibitions ISQED exhibition is being held in conjunction with ISQED07, features vendors offering design tools and methodologies in the area of design for manufacturing and quality. Exhibit floor will be open on Tuesday March 27, in parallel with technical sessions. Technical Sessions ISQED Technical sessions start on Tuesday March 27, and continue until the afternoon of Wednesday, March 28. Beside the above plenary sessions, panel discussions, and workshops, the program consists of nineteen technical sessions featuring over100 papers on various challenging topics related to design for manufacturability and quality. A partial list of topics is shown below. Detail program is available on the web at www.isqed.org. 1. Manufacturing, Semiconductor Process and Devices 1.1 Design for Manufacturability/Yield & Quality (DFM/DFY/DFQ) 2. Design 2.1 System-level Design, Methodologies & Tools (SDM) 2.2 Package - Design Interactions & Co-Design (PDI) 2.3 Robust & Power-conscious Devices, Interconnects, and Circuits (RDIC) 2.4 Emerging/Innovative Process & Device Technologies and Design Issues (EDT) 2.5 Design of Reliable Circuits and Systems (DFR) 3. EDA/CAD 3.1 EDA Methodologies, Tools, Flows & IP Cores; Interoperability and Reuse (EDA) 3.2 Design Verification and Design for Testability (DVFT) 3.3 Physical Design, Methodologies & Tools (PDM)

Posting to forums is available to community members only.
Login or Register

Forums > General topics > Event Notices > IEEE ISQED07 Call for Registration

ActiveForums 3.6