Thursday, January 08, 2009     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Skill Code to Pull Pin/Padstack Drill Diameter
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
mike0164
Posts: 2
Online: User is Offline
3/07/2006 12:55 PM  
Does anyone know of a way using Skill, to pull the drill diameter from a pin or padstack?  I have the dbid of the pin, and can pull the padstack name, but I cannot figure out how to assign a variable the diameter of the drill of the pin or padstack.  Any help would be greatly appreciated!
Dave Elder
Moderator
Posts: 150
Online: User is Offline
3/07/2006 1:03 PM  
Hi Mike,

Use pin ->definition ->drillDiameter

BTW, This would be a better posting for the Skill forum ;-)

Cheers, Dave

Dave Elder
Tait Electronics
mike0164
Posts: 2
Online: User is Offline
3/08/2006 7:22 AM  
Thanks!  This worked, when I used the "~>":
    pin~>definition~>drillDiameter
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > Shared code - SKILL > Skill Code to Pull Pin/Padstack Drill Diameter


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.