Wednesday, December 03, 2008     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: How do you draw a line/cline
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
Newbie
Posts: 26
Online: User is Offline
4/17/2005 11:51 PM  
Hi All,

I'm trying to draw a line using layer "BOARD GEOMETRY/OUTLINE".
May I know how this can be done?

Also is there any difference if I want to draw clines?

thanks,
newbie
Newbie
Posts: 26
Online: User is Offline
4/18/2005 2:07 AM  
Hi again,

can anyone please explain how you use the

1)"simple graphics drawing function" -chp12
or
2)"polygon operation function" - chp20

to draw a line

thanks
newbie

** that is chapters in the
Allegro® PCB and Package User Guide:
SKILL Reference
nzdave
Posts: 0
Online: User is Offline
4/18/2005 1:20 PM  
Use axlDBCreateLine
eg:
axlDBCreateLine(list(0:0 0:5 5:5 5:0 0:0), 0.0, "BOARD GEOMETRY/OUTLINE")

Cheers, Dave
nzdave
Posts: 0
Online: User is Offline
4/18/2005 1:24 PM  
The "simple graphics drawing utilities" are aimed at drawing in forms. Best avoided until you are familiar with Skill forms.

What are you trying to do with the polygon commands?

Cheers, Dave
Newbie
Posts: 26
Online: User is Offline
4/18/2005 11:45 PM  
Thanks again nzdave !!
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > Shared code - SKILL > How do you draw a line/cline


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.