Monday, May 21, 2012     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: Getting a list of layers
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
MarkG
Posts: 10
Online: User is Offline
1/04/2007 8:56 AM  
I need to turn off all of the layers except the wirebond layers.  The problem is, I don't know from design to design how many wirebond layers there are.  I need a way to find out all of the wirebond layer names and then be able to turn off all except those.
I believe there is a "Bondwire" attribute that can be assigned to these layers, but I'm not sure if these layers will consistantly have this attribute.

I appreciate your help in advance, thanks,
Mark
djs
Posts: 9
Online: User is Offline
1/04/2007 10:47 AM  
The Skill command "axlDBGetLayerType" will tell you if a layer is a "BONDING_WIRE" vs "CONDUCTOR" vs "DIELECTRIC" etc. If you check each CONDUCTOR or ETCH subclass you can build a list of just the bondwire layers and then set/reset the visibility using that list.
MarkG
Posts: 10
Online: User is Offline
1/04/2007 12:02 PM  
Hi djs, thanks.
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > Shared code - SKILL > Getting a list of layers


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.