Thursday, January 08, 2009     Register | Login | Search | Contact Us
     

Many of you already received communications about the move of the Cadence user community into cadence.com. And many of you have already joined, with over 4000 registrations in the first two weeks.

The new Cadence Community enhances the ability of Cadence users to connect and collaborate. In addition to moving the community into cadence.com -- enabling single sign-on for community, Sourcelink and Cadence events -- the new site is organized around nine technology segments, giving you easy access to product information, training, forums and blogs. Some of the new features include:
  • Ability to respond to posts via e-mail
  • Technology-specific blogs
  • Latest Web 2.0 social networking capabilities
  • Public profile options
  • Private messaging
  • Friends lists
Visit the new Cadence Community today at www.cadence.com/community and join the discussions!

Registration note: Due to the scope of the enhancements and the new SSO registration system, we were not able to migrate existing cdnusers.org member accounts. So new registrations are required, but this enables a broader set of functionality we think you'll enjoy.

Forum note: Under the guidance of forum moderators, we have taken the 20+ cdnusers.org forums and consolidated them into 11 forums on the new site. Posts have been brought over so you can leverage that posting history. CDNusers forums will be set to read only starting 7/30, and cdnusers.org will be redirected to the new community on 8/4.

Best regards,
Mike and Tom

Michael A. Catrambone - Steering Committee Chairman
Distinguished Engineer
PCB/Mechanical
UTStarcom, Inc.

Tom Diederich
Cadence Community Manager
Home
Forums
Subject: How to get Pad Attributes
Posting to forums is available to community members only.
Login or Register
Rate this topic:
   
Author Messages
leonlee
Posts: 81
Online: User is Offline
2/08/2007 11:44 PM  

How to get the padstack's information like as: Begin Layer, End layer, soldermask and pastemask, etc?

We can get the Drill information(Drill diameter, Drill figure and Drill char, etc) directly. Because there are generic attribute for them.
But for the Pad size, Soldermask size, I can't get directly.
For example, to get the pad size in ETCH/Top layer. I got a pad db and named it: pad_db

The padstack layer's information is in the list: pad_db->pads
if I want to get the Top Regular Pad, I can do it like this:

Pad_top = setof(item, pad_db->pads, item->layer=="ETCH/TOP")
Pad_top_regular = setof(item, Pad_top, item->type=="REGULAR")
Pad_top_regular_path = car(Pad_top_regular->figure)->_pathList

Then I should calculate these paths to confirm the figure's size.
I am not sure about the solution, maybe I make the easy thing difficult.


Leon Lee
Schneider-Electric
Posting to forums is available to community members only.
Login or Register

Forums > Silicon-package-board > Shared code - SKILL > How to get Pad Attributes


ActiveForums 3.6
     
Copyright 2006 Cadence Design Systems, Inc.