Saturday, July 05, 2008
Register
|
Login
|
Search
|
Contact Us
Home
Technology Zones
Articles
Podcasts
Forums
CDNLive!
Resources
Home
Forums
Unanswered
Active Topics
Forums
Search
Forums
>
Functional Verification
>
Simulation, Acceleration, Emulation
Subject: Spectre Syntax for Function
Posting to forums is available to community members only.
Login
or
Register
Rate this topic:
Author
Messages
Oldest First
Newest First
asingire
Posts: 3
Online:
2/26/2008 10:40 PM
Hi All,
I need to run a simulation in which I have to use a volatge controlled curent source, whose gain is related to the controlling voltage as I = 250exp-(450 / V), where V is the controlling voltage. Could someone please tell how do I do this in Spectre schematic or even in the schematic?
nnxx
Posts: 9
Online:
4/23/2008 1:44 PM
Verilog-A is your best bet.
Posting to forums is available to community members only.
Login
or
Register
Special Topics
--Low power
--Design Data Management
Digital IC
--Synthesis and test
--Formal verification
--Floorplanning, Place and route
Custom IC
-- Custom IC Electrical Design
-- Custom IC Physical Design
--Shared code - SKILL
Silicon-package-board
--Signal Integrity and Modeling
--PCB Design
-- IC Package, SiP and Co-design
--Shared code - SKILL
Functional Verification
--Simulation, Acceleration, Emulation
--Assertion-Based Verification and Formal Analysis
--SystemVerilog
--Verification Planning
--<i>e</i>
--Shared code - <i>e</i> Files
Cadence Academic Network
--AMS Methodology
--RF Methodology
--Verification Methodology
--Cadence Academic Network Member List
--Cadence Academic Network Announcements
--Cadence Academic Network Event Notices
--Cadence Academic Network General Questions
General topics
--Suggestions
--Event Notices
--Jobs
Forums
>
Functional Verification
>
Simulation, Acceleration, Emulation
> Spectre Syntax for Function
ActiveForums 3.6
Copyright 2006 Cadence Design Systems, Inc.